Oldsmobile 1999 Silhouette User Manual Page 339

  • Download
  • Add to my manuals
  • Print
  • Page
    / 432
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 338
yellowblue
6-37
Taillamps
1. Open the liftgate.
2. Remove the two screws from the taillamp housing
on the inboard side.
3. Pull off the entire taillamp housing. The locator/retaining
pins on the outboard side are part of the lamp assembly
and will remain intact during removal.
4. Remove the bulb holder by pressing the four retaining
tabs and pulling the holder away from the assembly.
5. Replace the bulb(s) by pulling the old one(s) out and
gently pushing the new one(s) into the bulb holder socket.
A. Taillamp Bulb
B. Back
-Up Lamp Bulb
C. Turn Signal Lamp Bulb
D. Stop/Taillamp Bulb
6. Snap the bulb holder back into place, making sure all
retaining tabs are properly over the bulb holder tabs.
7. Reinstall the taillamp assembly by inserting the
outboard locating/retaining pins until the lamp is
seated. Secure with the inboard screws.
For any bulb changing procedure not listed in this
section, contact your dealers service department.
Page view 338
1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 431 432

Comments to this Manuals

No comments