Oldsmobile 2002 Bravada User Manual download pdf (Page 100)

2-32

Turn and Lane Change Signals

The turn signal has two upward (for right) and two

downward (for left) positions. These positions allow

you to signal a turn or a lane change.

To signal a turn, move the lever all the way up

or down. When the turn is finished, the lever will

return automatically.

An arrow on the instrument

panel cluster will flash in

the direction of the turn or

lane change.

To signal a lane change, just raise or lower the lever

until the arrow starts to flash. Hold it there until you

complete your lane change. The lever will return by

itself when you release it. When signaling a lane

change a light will flash on the bottom of the driver’s

or passenger’s outside rearview mirror.

As you signal a turn or a lane change, if the arrows flash

more quickly than normal, a signal bulb may be burned

out and other drivers won’t see your turn signal.

If a bulb is burned out, replace it to help avoid an

accident. If the arrows don’t go on at all when you

signal a turn, check the fuse (see “Fuses and Circuit

Breakers” in the Index) and for burned

-out bulbs.

If you have a trailer towing option with added wiring for

the trailer lamps, a different turn signal flasher is used.

With this flasher installed, the signal indicator will flash

even if a turn signal bulb is burned out. Check the front

and rear turn signal lamps regularly to make sure they

are working.

Turn Signal On Chime

If your turn signal is left on for more than 3/4 of a mile

(1.2 km), a chime will sound at each flash of the turn

signal. To turn off the chime, move the turn signal lever

to the center.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 392 393

No comments

Oldsmobile 2002 Bravada User Manual Page 100